Industry, market drivers, key enterprises and their strategies, as well as technologies and investment status, risks and trends. Browse Full Report With -rock: http://www. Nonrepresentational. Biz/analysis-details/china-tire-manufacturing- industry-2014 The tire Is a circle-shaped, elastic rubber product rolling on the ground and fitted to various vehicles or machineries. It is generally mounted on a metal rim to support the vehicle body, buffer the external impact and ensure the vehicles contact with the ground and its driving performance.
The tire is usually used in complex and harsh notations and required to sustain various distortion, load, force and high/low temperature effects during driving. Therefore, it must have relatively high bearing, traction and buffer performance. At the same time, It also needs to have high abrasion performance and flexing resistance and low rolling resistance and heat generation. Half of rubber consumption in the world is for production of tires, which reflects the rubber consumption capacity of the tire manufacturing industry. To Get Download Full Report with TOCK: http://WV. Irrecoverableness. Is/sample/sample/182987 core products: Chinas national standards for tires, the U. S. Tire and Rim Manual, the European Tire and Rim Standards, the Japan Tire Standards and related international standards categorize tires by their purposes as follows: 1) Passenger car tires Indicate the tires that are mounted on the passenger cars, which are mainly used for high-speed driving on road surfaces in good conditions with a maximum speed up to 200 km/hour or faster, requiring driving comfort, low noise, outstanding handling and stability. Most tires adopt the radial structure.
As required by deferent driving speeds, the tires are divided into different series. Commonly seen in related standards and manuals are 95 and 88 Series bias tires 2) Light truck tires – usually refer to the tires for heavy trucks with a rim diameter of or below 16 inches and a wide section of or above 9 inches. Such tires are mainly used on highway at a driving speed generally up to 80 -? 100 km/h. 3) Truck and bus tires – usually refer to the tires for heavy trucks, dump trucks and various specialized vehicles and trailers with a rim diameter between 18 and 24 inches and a section width of 7 inches.
Such tires are suitable for complex driving road surfaces, including asphalt roads in good conditions, gravel, dirt, muddy roads, snow and ice roads in poor conditions and even roads without surfaces, at a driving speed not faster than 80 km/h. 4) Off-the-road tires – TORT tires are mounted on specialized engineering mechanical vehicles, such as loaders, bulldozers, excavators, land leveling machines, rollers, land conditioners, rock work machines, etc. Such tires are suitable for a low driving speed ND have stringent requirements for road conditions and load performance. This type of tires mainly adopts the bias structure.
However, but French Michelin also uses the radial structure on its products. It also can be divided into standard and wide-base tires by tire section width. 5) Cross-country vehicle tires – cross-country vehicles usually driven use for-wheel drive. Tires for cross-country vehicles are suitable for driving in poor road conditions, such as desert, muddy road, soft soil or other roads without surfaces and require great passage performance. Cross-country vehicles usually sue tires with a lower pressure and sometimes pressure-regulating tires, which can adjust the tire pressure in accordance with the road conditions.
In order to improve cross-country passage performance, such tires generally increase the contact area and reduce ground pressure by widening the tire and the rim section width and reducing the rim diameter. The tires have both bias and radial structure. 6) Agricultural and forestry machinery tires agricultural tires are usually mounted on tractors, combine harvesters and agricultural machine vehicles. Forestry machinery tires are mounted on forestry tractors and forestry machinery, for forestry harvesting, skidding, scraping and mining works.
Characteristics of the two types of tires include: low driving speed and stringent use conditions. If used on vehicles that drive on rural roads in poor conditions, hard stub fields or gravel mountain roads, eve roads without surfaces, the tires may be cut open or slashed. Another feature of the tires is intermittent working with short mileage, which requires the tires to be highly flex- crack resistant and aging resistant. Most of the tires are using the bias structure but some are using the radial structure.
